Error Messages - Yamaha Song Filer Manual

Table of Contents

Advertisement

Error Messages

"The selected MIDI device is in use. Quit any applications currently using
the device."
This message is displayed when the Song Filer starts up and the MIDI driver is currently being
used by another application. Click [OK], quit any applications that are using the MIDI driver, and
start the Song Filer again.
"Cannot find the MIDI device. Confirm the MIDI device settings."
If the MIDI IN/OUT terminals are connected to the computer via a MIDI interface, install and set up
the MIDI driver properly, referring to the manual that came with the MIDI interface. If the TO HOST
terminal is connected to the computer, install YAMAHA CBX Driver and select the correct COM
port, etc.
"OMS is not installed."
Install the OMS software and set it up properly.
"Data transfer failed. Confirm the musical instrument is connected to the
computer properly (HOST SELECT switch and others)."
Confirm the following and try the operation again.
Is the musical instrument properly connected to the computer?
If not, make the proper connections according to the instructions in the musical instrument's
Owner's Manual.
Is the musical instrument switched ON?
If not, switch the power ON.
Is the musical instrument's HOST SELECT switch set correctly?
Make the correct the setting according to the instructions in the musical instrument's Owner's
Manual.
Is the driver properly set up? (Windows)
If the TO HOST terminal is connected to the computer, install YAMAHA CBX Driver and select
the correct COM port, etc.
Set up OMS properly. (Macintosh)
"Data transfer is not possible in the current mode. Designate a mode that
allows data transfer by operating the musical instrument."
This message is displayed when the data transfer is disabled on your musical instrument (e.g.
during playback, recording or recording-standby.)
n
The mode that does not allow data transfer differs, depending on the musical instrument.
"There is no room for creating "********.*** (File name)"."
The file could not be saved to the musical instrument because the memory is full.
"Specify up to 8 letters for the file name and up to 3 for the extension."
A file name can consist of up to 8 characters plus a 3-character extension (extensions cannot be
editted).
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents