Important Tips - Samsung WA60U1E Owner's Instructions Manual

Use SPIN only?
1. Turn the power on.
2. Select SPIN.
• Press the course button.
3. START/PAUSE
• Close the lid.
As you need
You can wash clothes efficiently by selecting a water level.
1. The default setting is HIGH (In case of babycotton, the default setting is MED)
• Press WATER LEVEL to select the level.
• Order of the water level : HIGH
• If you change the water level before the water fills up to the previously selected
level, washing time will change.
2. Changing to another course during washing
• Press START/PAUSE and then select a course. Then, press START/PAUSE
again.
Caution & Notes When Using the Heating Function
• Be careful with the washing machine as the temperature inside the machine may
become very hot during the Heating washing process.
• The HIGH water level cannot be selected for the baby cotton course in order to
secure safety water drain. Thus, do not put more than 1.5kg of garments into the
machine. Excessive loading may damage clothes. (Under shirts 130g, underpants
50g, socks 50g, standard towel 150g, bathing towel 300g)
• During the Heating process, the machine will not work without its lid being in the
closed position.
• You cannot adjust the water level after the course has started.
Rust Drain Function
• Anti-damage function of texture due to impurities such as rust on tap water, which
drains rust water by means of a pumping motor during 10 seconds along with
laundry start for all the courses.
MED LOW HIGH

IMPORTANT TIPS!

The Heating Washing Function
• If you want to boil and wash clothes manually, you have to go through the entire
troublesome process such as rough washing, Heating clothes with detergent and
then rinsing repeatedly. The Heating Washing Function ensures a convenient and
clean way of washing by automating the complicated manual Heating washing
process.
Why does dirt come out easily?
• Once a garment is boiled, dirt can easily come out, as the plies of the texture will
become curved. Even ingrained dirt can be removed easily as plies often rub each
other during the washing process.
• High temperature usually loosens dirty garments so that dirt can be removed or
dissolved easily. It can also increase the cleaning effect of detergent.
• The water vapor generated during Heating pulls the dirt from the surface of a
garment.
Why do we need to boil clothes?
Sterilization Effect
• Heating clothes is very effective in sterilization. It ensures pleasant and clean
clothes and prevents bad smells and germs that cause skin allergies.
Bleaching Effect
• Heating clothes is very effective in bleaching by removing ingrained dirt from
garments, making the color of garments clearer.
Cleaning Effect
• The higher the temperature is, the better the cleaning effect becomes.
Heating washing is one of the best washing methods as the cleaning effect can
increase by 60% compared to washing at normal temperature and by 20% even if
you use only half of the detergent amount.
Checking out garments
1. Group garments per their type, color and the level of dirt.
(e.g. heavily stained items, less-discolored items, white or soft items, etc.)
2. Fasten buttons or hooks and remove all the contents from pockets.
3. If a garment is torn or worn out, repair it before washing.
4. Check buttons to see if they are firmly attached.
5. It is recommended to treat heavy stains before washing.
6. If a garment is stuck in the lid, this may damage the garment or cause water
leakage. Make sure there is no garment stuck in the lid before washing.
7