Memorizing The Channels; Selecting The Video Signal-Source - Samsung CT-17N11MJ Owner's Instructions Manual

AA68-03380A-00_XTC_ENG
O

Memorizing the Channels

Your TV can memorize and store all of the available channels for both "off-air" (antenna)
and cable channels. After the available channels are memorized, use the CH
CH
channels by entering the channel digits. There are three steps for memorizing channels:
selecting a broadcast source, memorizing the channels (automatic) and adding and delet-
ing channels (manual).

Selecting the Video Signal-source

Before your television can begin memorizing the available channels, you must specify the
type of signal source that is connected to the TV (i.e., an antenna or a cable system).
1
Press the MENU button to
display the menu.
Press the L or M button
to select "Channel" , then
press the œ œ or √ √ button.
2
Repeatedly press the œ œ or
√ √ button to cycle through
these choices:
ANT (antenna), STD, HRC or
IRC (all cable TV).
Press the EXIT button to
exit the menu.
Note: STD, HRC and IRC identify various types of cable TV systems. Contact your local cable com-
pany to identify the type of cable system that exists in your particular area.
At this point the signal source has been selected. Proceed to "Storing Channels in Memory" (next
page).
4/20/04 11:52 AM Page 17
P E R AT I O N
buttons to scan through the channels. This eliminates the need to change
œ œ √ √
√ √
œ œ √ √
√ √
√ √
œ œ √ √
√ √
œ œ √ √
√ √
√ √
English - 17
and