Connecting To A Cable Box That Descrambles All Channels; Connecting To A Cable Box That Descrambles Some Channels - Samsung CT-17N11MJ Owner's Instructions Manual

AA68-03380A-00_XTC_ENG
I
N S TA L L AT I O N

Connecting to a Cable Box that Descrambles All Channels

1
Find the cable that is con-
nected to the ANTENNA
OUT terminal on your cable
box.
2
Connect the other end of
this cable to the VHF/UHF
antenna terminal on the
back of the TV.

Connecting to a Cable Box that Descrambles Some Channels

If your cable box descrambles only some channels (such as premium channels), follow the
instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of
coaxial cable. (These items are available at most electronics stores.)
1
Find and disconnect the
cable that is connected to
the ANTENNA IN
terminal on your cable box.
2
Connect this cable to a
two-way splitter.
3
Connect a coaxial cable
between an OUTPUT termi-
nal on the splitter and the
IN terminal on the cable
box.
4/20/04 11:52 AM Page 10
Incoming Cable
This terminal might be labeled
"ANT OUT", "VHF OUT" or simply,
"OUT".
"ANT IN", "VHF IN" or simply,
"IN".
Splitter
Incoming Cable
Splitter
English - 10
This terminal might be labeled
Cable Box