Viewing the Menus
1
Press the MENU button.
The main menu is displayed on the screen. Its left side
has five icons: Input, Picture, Sound, Channel, and
Setup.
Press the ... or † button to select one of the icons.
2
Press the ENTER button to access the icon's sub-menu.
Press the ... or † button to move to items in the menu.
3
Press the ENTER button to enter items in the menu.
Press the .../†/œ/√ button to change the selected
4
items. Press the MENU button to return to the previous
menu.
5
Press the EXIT button to exit from the menu.
Setup - Plug & Play
When the television is initially powered on, several basic
customer settings proceed automatically and subsequently.
The following settings are available.
1
If the television is in standby
mode, press the POWER
Start Plug & Play
button on the remote
control.
Enter
The Start Plug & Play
is displayed. To start Plug &
Language
Play, press the ENTER
English
button. The Language
Indonesia
menu is displayed.
Melayu
➢
The Language menu
will automatically
Move
appear after several
seconds, even if the ENTER button is not pressed.
Select the appropriated language by pressing the ... or
2
† button. Press the ENTER button.
The Check antenna
input. is displayed.
➢
If any language is not
selected, the language
menu will disappear
about 30 seconds later.
3
Make sure that the antenna
is connected to the
television (refer to page 1).
Press the ENTER button.
The Area menu is
displayed.
Press the ... or † button to
4
select your area. Press the
ENTER button.
5
To search the channels,
press the ENTER button. To
stop the search, press the
ENTER button.
When the channel
searching has finished, the
Clock Set menu is
displayed.
Press the œ or √ button to
6
move to the hour or minute.
Set the hour or minute by
pressing the ... or † button.
7
When you have finished,
Plug & Play
press the MENU button.
The Enjoy your
OK
viewing. is displayed, and then the channel which has
Exit
been stored will be activated.
Plug & Play
Enter
Skip
continued...
Plug & Play
Check antenna input.
OK
Enter
Skip
Plug & Play
Area
Asia/W.Europe
South Africa
CIS/E.Europe
America
China
Hong Kong/UK
Australia
NZL/Indonesia
Move
Enter
Skip
Plug & Play
Auto Store
Start
Enter
Skip
Plug & Play
Auto Store
P 1 C--
102MHz
7 %
Stop
Enter
Skip
Plug & Play
Clock Set
- - : - -
Move
Enter
Adjust
Skip
Enjoy your viewing.
OK
English - 3
Re-setting the Plug & Play
TV
Method: MENU ➜ ... ... /† †
Plug & Play
Language
(Setup) ➜ ENTER ➜ ... ... /† †
Time
(Plug & Play) ➜ ENTER
Child Lock
Blue Screen
Melody
Demonstration
Move
Input
-
(depending on the model)
Source List / Edit Name
N Source List
TV
You can switch between
TV
AV1
viewing signal from
AV2
connected equipment, such
Componet - - - -
as a VCR, DVD, set-top box,
and the TV source
Move
(broadcast or cable).
➢
You can change the required external source simply
by pressing the SOURCE button on the remote
control. It might take a short period of time for
pictures to be switched. To return to the TV mode,
press the TV button on the remote control.
N Edit Name
TV
You can give a name to the
AV1
AV2
external source.
Component : - - - -
Move
Setup
√ √
√ √
: English
√ √
√ √
√ √
: Off
√ √
: On
√ √
Enter
Return
Source List
- - - -
- - - -
Enter
Return
Edit Name
----
: - - - -
: - - - -
VCR
DVD
Cable STB
Satellite STB
AV Receiver
DVD Receiver
† †
Enter
Return