To Install The Program To Your Pc - Samsung Wingo S-P2450 Instruction Manual

To install the program to your PC

• The computer should be set while booting as shown below.
1) Turn on the computer.
2) While testing the RAM, press the F2 or Del key to enter the Setup screen.
3) Move to the Peripheral setting screen to set the Printer port.
4) Set the Printer port to the ECP mode.
5) Save the setting and reboot the computer.
Check the "Environment
• Refer to page MP-3.
In order to download MP3 files to MP3 Player, you should install programs contained on the CD-ROM
supplied for your PC.
• This program may not be installed normally depending upon the type of your PC if MS EXPLORER version
4.01 or higher has not been installed, so install it by the supplied CD-ROM disc and via Internet.
1 Load the supplied software CD into the CD-ROM drive of
your PC and click on the "NEXT" Button.
• The MP3 Player setup program will start automatically.
• If the setup does not start automatically, find the "setup.exe" file
using the File Finder, then double click on it to execute the program.
• To install in another directory, use the Browse Button to select.
2
Check the icon of program path and then press the
"NEXT" Button.
• An icon will be created automatically.
3
After installing procedures are completed, click the
"Finish" Button to exit the setup program.
Be sure to keep the CD supplied safe. If you lost it, or if you want to upgrade to the newest version,
you can download from the Internet Site below:
MP3 Player Internet Site
http://www.wingo.co.kr
SAMSUNG AUDIO
options" menu of unit, set to the ECP mode by check.
GB
MP-2