To Install The Program To Your Pc - Samsung MY-MP200 Instruction Manual

To install the program to your PC

• The computer should be set while booting as shown below.
1) Turn on the computer.
2) While testing the RAM, press the F2 or Del key to enter the Setup screen.
3) Move to the Peripheral setting screen to set the Printer port.
4) Set the Printer port to the ECP mode.
5) Save the setting and reboot the computer.
Check the "Environment
• Refer to page 7.
In order to download MP3 files to MP3 Player, you should install
programs contained on the CD-ROM supplied for your PC.
• This program may not be installed normally depending upon the type of your PC if
MS EXPLORER version 4.01 or higher has not been installed, so install it by the
supplied CD-ROM disc and via Internet.
1
Load the supplied software CD into the CD-ROM
drive of your PC and click on the "NEXT" Button.
• The MP3 Player setup program will start
automatically.
• If the setup does not start automatically, find the
"setup.exe" file using the File Finder, then double
click on it to execute the program.
• To install in another directory, use the Browse Button
to select.
2
Check the icon of program path and then press
the "NEXT" Button.
• An icon will be created automatically.
3
After installing procedures are completed, click
the "Finish" Button to exit the setup program.
Be sure to keep the CD supplied safe. If you lost it, or if you want to upgrade to the
newest version, you can download from the Internet Site below:
6
options" menu of unit, set to the ECP mode by check.
MP3 PLAYER