Using The Travel Adapter - Samsung SGH-V208 Manual

Tri band gprs telephone
Table of Contents

Advertisement

Getting Started
1. Insert the battery into the charger, ensuring
that the terminals on the battery are in
contact with those on the charger. Press the
battery until it clicks into place.
2. Plug the connector of the travel adapter into
the jack at the bottom of the charger.
3. Plug the adapter into a standard AC wall
outlet.
The LED on the charger indicates the
charging progress with the following colours:
• Red: the battery is charging.
• Green: the battery is completely charged.
• Yellow: the battery is not correctly plugged
in or is operating at a too high or too low
temperature.
20
4. When charging is finished, unplug the adapter
from both the power outlet and the charger.
5. Remove the battery from the charger.

Using the Travel Adapter

The travel adapter allows you to use the phone
while the battery is charging, but this causes the
phone to charge more slowly.
1. With the battery in position on the phone,
plug the connector of the travel adapter into
the jack at the bottom of the phone.
Getting Started
21

Advertisement

Table of Contents
loading

Table of Contents