Table of Contents
Advertisement
S S e e t t t t i i n n g g s s
Security
Your phone provides you with various security
options, including a user-programmable lock code
and emergency number features.
To access the Security menu, you must enter the 4-
digit lock code. It is preset to "0000" at the factory.
Lock Phone
(Menu 6-5-1)
In the lock mode, you cannot dial numbers, except for
making an emergency call, or accessing menu
options. The phone can receive incoming calls and
messages, even though the phone is in the lock
mode.
The following options are available:
Unlocked: the phone remains unlocked.
On power up: the phone is automatically locked the
next time you turn the phone on.
Now: the phone is immediately locked.
To place an emergency call in the lock mode, enter a
programmed number and then press
recognizes standard emergency numbers, such as
191 or 112 in the Emergency # menu option (Menu
6-5-3); see page 105.
To unlock the phone, press the Unlock soft key and
enter the 4-digit lock code. The phone is immediately
unlocked.
104
(Menu 6-5)
. The phone
Change Lock
(Menu 6-5-2)
This feature allows you to change your current lock
code to a new one. The lock code is preset to "0000"
at the factory.
Enter a new, four-digit lock code and enter the code
once again at the prompt.
Note: Your phone does not allow viewing of the lock
code for security reasons, so be sure to write
the lock code down or memorize it if you have
changed
Emergency #
(Menu 6-5-3)
Your phone provides the option of storing two
emergency numbers. All of these numbers can be
manually dialed at any time, even if your phone is
locked or all outgoing calls are restricted.
IMPORTANT NOTICE!
Emergency calling may not be available on all
wireless networks at all times, due to the various
transmission methods, network parameters and user
settings used to complete a call from your wireless
phone. A connection cannot always be guaranteed.
DO NOT depend on this phone as a primary method
of dialing 112 or for any other essential or
emergency communications.
Remember to always turn your phone on and check
for the adequate signal strength before placing a
call.
S S e e t t t t i i n n g g s s
105
Advertisement
Table of Contents
