Samsung MAX-DN54 Instruction Manual page 30

Dolby Surround (Cont'd)
Dolby Surround modes
Press the Dolby Surround button.
PRO-Logic is selected, and the playback sound has the Dolby
Surround effect.
To cancel Dolby Surround mode
Press the Dolby Surround button repeatedly until OFF is
displayed.
On/Standby
Disc Skip
When playing DVD, if an Audio is Dolby Digital, it can not be
operated.
When being connected to headphones and microphone, this
function cannot be operated.
GB
3
Open/Close Mute
1 2 3
DSP/EQ Dolby Surround
4 5 6
S.Bass Power Sound
1
7 8 9
10/0
Clear Program Repeat
DVD/CD
DECK
Deck 1/2 Band
+
Volume
0
Dolby Surround (Cont'd)
Additional Dolby Surround modes
In addition to the PRO-Logic mode, this unit is also equipped with the
3 STEREO modes.
PRO-Logic : Use this mode when rear speakers are connected. The
center channel signals are output through the left and right speakers.
PRO-LOGIC 3 STEREO
3 STEREO : Use this mode when no rear speakers are connected. This
mode reproduces rear sounds through the front speakers.
3 STEREO
Depending on the sound source or listening conditions, a surround
effect may not be obtained even when the Dolby Surround is on.
The full Dolby Surround effect cannot be obtained when using soft-
ware without
DOLBY SURROUND
P R O L O G I C
system instead.
TM Manufactured under license from Dolby Laboratories Licensing
Corporation. DOLBY, the double-D symbol
are trademarks of Dolby Laboratories Licensing Corporation.
On/Standby
1 2 3
4 5 6
7 8 9
10/0
Disc Skip Clear
Deck 1/2
+
Volume
OFF
OFF
mark. In this case, use the DSP
and "PRO LOGIC"
Open/Close Mute
DSP/EQ Dolby Surround
S.Bass Power Sound
1
Program Repeat
DVD/CD
DECK
Band