Checking Or Changing Programmed Cd Tracks; Searching For And Storing The Radio Stations - Samsung MAX-VJ730 Instruction Manual

MAX-ZJ730 GB LATIN 1~17
Checking or Changing Programmed
CD Tracks
GB
You can check or change your selection of tracks at any time.
1
Press once if you have started listening to the selection.
2
Press PROGRAM.
Result: The following indications are displayed:
(CH = Check, 01=Program No, CH I = Disc No.1,2,3, – – = Track No on
the disc)
If you have already programmed 24 tracks, CH is displayed
instead of PR when you press PROGRAM.
3
Press PROGRAM again.
Result: The first track selected is displayed, together with the letter CH (Change).
4
Press PROGRAM once or more times until the track to be changed is dis-
played.
5
If necessary, press the corresponding Disc (1, 2, 3) button to change discs.
6
Press and or turn MULTI JOG to select a different track.
7
Press PROGRAM to confirm your change.
8
Press CD ( ) to start listening to the selection.
Result: The first track selected is played.
8
TIMER ON/OFF
AI SLEEP
DISC SKIP
6 1
VOLUME
DECK
1/2
16
5/31/04 10:19 Page 16
5
6
1
6
6
2,3,4,7
PROGRAM/SET MEDLEY
SHUFFLE CD REPEAT
8
6
CD/MP3-CD
TUNING/
ALBUM
TUNING
MODE
+10
Searching for and Storing the Radio
Stations
You can store up to:
15 FM stations
(option)
15 AM stations
15 FM stations
8 MW stations
(option)
7 LW stations
15 FM stations
5 MW stations
(option)
5 SW1 stations
5 SW2 stations
1
Switch the system on by pressing STANDBY/ON.
2
Select the TUNER function by pressing TUNER.
3
Select the required frequency band by pressing TUNER (BAND)
again on the front panel or TUNER (BAND) on the remote control.
Result: The appropriate indication is displayed:
FM
MW
LW(OPTION)
SW1, SW2(OPTION)
4
To search for a Press TUNING MODE
station...
Once or more times until MANUAL
Manually
is displayed.
Once or more times until AUTO is
Automatically
displayed.
5
Select the station to be stored by:
Turning the MULTI JOG knob to the right or to the left to increase
or decrease the frequency respectively
or
Pressing TUNING or
To scroll through the frequencies faster when searching
manually, hold down the TUNING Down or Up buttons.
The automatic search procedure may stop on a frequency that
does not correspond to a radio station. If this happens, use the
manual search mode.
6
Adjust the volume by:
Turning the VOLUME knob on the front panel
or
Pressing the VOLUME + or – buttons on the remote control
7
Select the FM stereo or mono mode by pressing MONO/ST.
8
If you do not want to store the radio station found, revert to Step 4
and search for another station.
Otherwise:
a Press MEMORY.
Result: The PRGM is displayed for a few seconds.
b Press TUNING Down and Up to assign a program number
between 1 and 15.
c Press MEMORY to store the radio station.
Result: PRGM is no longer flashed and the station is stored.
9
To store any other radio frequencies required, repeat Steps 3 to 8.
The PROGRAM function can be used to assign a new station
to an existing program number.
You can also use PROGRAM/SET button on the remote con-
trol to instead of MEMORY button in step 8.
Frequency Modulation
Medium Wave
Long Wave
Short Wave
on the remote control