Setting The Delay Time - Samsung HT-DS1100T Instruction Manual

45P~82P(DS1000)-GB-NOR

Setting the Delay Time

If the speakers cannot be placed at equal distances from the listening position, you can adjust the
delay time of the audio signals from the center and rear speakers.
59
10/27/04 11:24 AM Page 60
1
Setting up the Speaker Delay Time
When 5.1CH Surround Sound is played, you can enjoy the best sound if
the distance between you and each speaker is the same. Since the sounds
arrive at the listening position at different times depending on the
placement of speakers, you can adjust this difference by adding a delay
effect to the sound of the Center Speaker and Surround Speakers.
Note
•
With
•
With AC-3 and DTS, the delay time can be set between 00 and 15mSEC.
In Stop mode,
press MENU
button.
(Dolby Pro Logic II), the delay time may be different for each mode.
Press Cursor button
2
to move to 'Audio' and
then press ENTER
button.