Basic Tv Tuner Operations; Copying From Dvd To Vcr - Samsung DVD-V85K Instruction Manual

00046B DVD-V85K/XSH-GB1 11/9/02 9:29 AM Page 16

Basic TV Tuner Operations

GB
1
2
16
The following buttons are used when watching television via the
DVD-VCR's built-in TV tuner.
1
0-9 Buttons
Press to select channels directly.
2
Display
Press to display the channel you are watching.
Also works in DVD and VCR mode.

Copying from DVD to VCR

The DVD-VCR allows you to copy the contents of a DVD to a VHS
tape with a press of the COPY button.
If the DVD you are attempting to copy is copy
protected, you will not be able to copy the disc. It is not
permitted to copy Macrovision® encoded DVDs.
1
Insert Disc
Insert the disc you wish to copy in the DVD deck and close the
drawer.
2
Insert VHS Tape
Insert a blank VHS videotape into the VCR deck.
3
Copy the DVD to VHS Tape
Press the COPY button on the DVD-VCR front panel.
The DVD will go into Play mode and the VCR will go into Record
mode.
4
Stop the Copy Process
When the DVD is finished playing, press the VCR button on the
remote control and then press the STOP button to end the copy.
You must stop the Copy process manually when the DVD movie
ends or the DVD may replay and record over and over again.
For NTSC DVD or VCD copy
Before starting the copy process, set the Quasi PAL to
Off in Display options of SETUP MENU (see page 49).
If Quasi PAL is On, the copy process can not active.
The copy is only active PAL tape system.
GB
1
2
3
4
4
17