Tuner Band Setting; Auto Channel Memory - Samsung CHT-420 Instruction Manual

Tuner Band Setting

This feature allows you to manually set the DVD-VCR's tuner band
to Antenna or Cable, whichever you connected to the Antenna In
jack during initial setup.
• Use this setting only if Auto Setup detected the incorrect tuner
band, i.e. channels are coming in on the wrong channel numbers.
1
1 Open "MENU"
With the DVD in stop mode, press the MENU button.
2 Select "Install"
Using the up/down and left/right buttons, move the selection cursor
to "Installation", then press ENTER to select.
MAIN MENU
3 Select "Channel Setup"
DVD VCR Options Language
Using the up/down and left/right buttons, move the selection cursor
to "Channel Setup", then press ENTER to select.
Install
Program Clock Install Exit
Installation
4 Select "Ant/Cable"
➛ ❿
RETURN ENTER
❷
Move the selection arrow to "Ant/Cable" then press right to select
from the following options:
• Antenna - Indicates that the DVD-VCR is connected to an indoor
INSTALLATION
• Cable TV - Indicates that the DVD-VCR is connected to Cable TV.
❿
Channel setup
Volume light : [Auto]
RETURN ENTER
❷
CHANNEL SETUP
❿
Ant/Cable: [Cable TV]

Auto channel memory

Channel add/delete
➛ ❿
RETURN
❷
CHANNEL SETUP
❿
Ant/Cable: [Antenna]
Auto channel memory
Channel add/delete
➛ ❿
RETURN
❷
18
or outdoor VHF/UHF antenna.
Auto Channel Memory
Auto Channel Memory will automatically seek and store all active
channels in your area.
1 Open "MENU"
With the DVD in stop mode, press the MENU button.
2 Select "Install"
Using the up/down and left/right buttons, move the selection cursor
to "Installation", then press ENTER to select.
3 Select "Channel Setup"
Using the up/down buttons, move the selection cursor to "Channel
setup", then press ENTER to select.
4 Run "Auto channel memory"
Move the selection arrow to "Auto channel memory," then press
ENTER to select.
• The DVD-VCR will automatically search for all available
channels in the selected Tuner Band. This procedure may take
a few minutes to complete.
• When finished, the lowest channel found will be displayed.
1
2,3
MAIN MENU
DVD VCR Options Language
Install
Program Clock Install Exit
Installation
RETURN ➛ ❿ ENTER
❷
INSTALLATION
❿
Channel setup
Volume light : [Auto]
RETURN ENTER
❷
CHANNEL SETUP
Ant/Cable: [Cable TV]
❿
Auto channel memory
Channel add/delete
RETURN ENTER
❷
Memorizing CH 07
. . . . . please wait . . . . .
19