Airing Your Room - Samsung AW0560A Owner's Instructions Manual

Airing Your Room

If you want to provide air circulation without cooling, you can use the Fan mode.
1
If necessary, press the (On/Off) button.
Result: The air conditioner starts up in the mode selected when
the unit was last used.
The unit beeps twice.
2 If the fan speed(F1, F2 or F3) is not displayed on the control panel:
Press the FAN button on the remote control
or
Press the Mode button on the unit one or more times until the fan speed
(F1, F2 or F3) is displayed.
Result: The unit beeps each time you press the Fan/Mode button.
The air conditioner starts up in Fan mode.
You can change modes at any time.
When the air conditioner is in the Fan mode, the temperature
cannot be set or displayed.
3 To set the fan speed:
Press the HIGH, MED or LOW button on the remote control as desired.
or
Press the Fan Speed button on the unit one or more times until the
desired fan speed(F1, F2 or F3) is displayed.
4 To control the direction of the air flow, refer to page 10.
Remote Control Control Panel
9
E-