Philips 28PW960B/58 Handbook page 8

c
c
step Entering the programme number
Now you must assign a number of your choice to the TV channel
located. In this way you decide for yourself the order of all your TV
channels.
With the assigned programme number you can call up your TV channel
again later.
4
Press the yellow key c.
5
Hold down the P - or + key or use the digit keys on the remote control
until the desired programme number appears in the menu.
Go on to step d.
d
d
step Storing steps a to c
Now the TV system, the located TV channel and its programme number
must be stored in the memory.
4
Press the blue key d.
5
PROGRAMME STORED
5
The TV channel is stored in the memory.
repeat
Do you want to store another TV channel?
4
Repeat steps a to d.
Are you connected to the cable system?
4
Begin immediately with step b. You have already selected the TV
system in step a for all channels.
out
Have you finished locating TV channels?
4
Press
5
The
Go on to 5.
8
appears briefly at the top of the menu.
.
MENU
menu appears again.
TV INSTALLATION