Table of Contents
Advertisement
1
1
Preparation
Place the TV on a solid surface.
For ventilation, leave a space of at least 5 cm free all around the set.
This TV requires a mains voltage of 220 V - 240 V.
Insert the aerial plug tightly into the aerial socket
of the TV with an aerial cable of good quality.
You can improve the picture quality by using the suppressor-
aerial-cable supplied.
CABLE
Insert the mains plug in the wall socket.
Remote control
This remote control has been developed to operate your TV.
However some main functions of your audio and video equipment from
our product programme are controllable as well.
Tear off the label, written in your language from the label sheet,
supplied with these instructions, click it onto the inside surface of the
door of the remote control.
Remove the cover of the battery compartment on the back of the
remote control.
Insert the 2 batteries supplied (type R03G-1,5V).
Click the cover back into place.
The Philips batteries supplied with the remote control unit of your new
TV set do not contain the heavy metals mercury and cadmium.
Nevertheless in many countries exhausted batteries may not be
disposed of with your household waste.
Please ensure you are aware of any local regulations governing the
disposal of exhausted batteries.
4
Press the TV key below the display.
5
In the window of the remote control the letters TV appear in a
grey block.
You can now operate your TV with your remote control.
Go on to 2.
Installation
g
at the back
TV
VCR
12 SAT LD
TUNER CD TAPE
TV
M
C
3
Advertisement
Table of Contents
