Recording Programmes - Philips DSX6073/03A Manual

5.3 RECORDING PROGRAMMES

To record a programme, the receiver must be switched to the channel you want to record. You
can program the receiver so that it will automatically record the channel you want to record at
the right time. This can be very useful if you want to record different channels when you're
absent. Nevertheless, you still have to program your videorecorder too.
A. RECORDING A DIGITAL CHANNEL YOU'RE WATCHING
Select the chosen channel on the receiver and preselect the videorecorder on the receiver. You
can start recording.
WARNING!
You can't record one digital channel whilst watching another one.
B. RECORDING A PROGRAMME THAT MUST BE BROADCAST
LATER
You first have to preselect your videorecorder on the decoder. Then you will have to program
your digital receiver so that it will switch on at the right time and on the right channel.
You can program the receiver from the MENU (MENU button) or from the EPG (EPG-button).
MENU button
• Press MENU and 1, and then press the number of the programme.
Choose a sequential number for the recording. This number is not important: you can
begin with 1, than choose 2, 3, 4, etc...
PROGRAMMA'S OPNEMEN
VERGEET NIET DE VIDEORECORDER
TE PROGRAMMEREN
1 24.09 PLANETE 15:10-16:10
2 24.09 PLANETE 15:10-16:10
3 PROGRAMMA BESCHIKBAAR
4 PROGRAMMA BESCHIKBAAR
5 PROGRAMMA BESCHIKBAAR
6 PROGRAMMA BESCHIKBAAR
PROGRAMMA BESCHIKBAAR
7
8 PROGRAMMA BESCHIKBAAR
OK
PROGRAMMA'S OPNEMEN
E
WISSEN
A TERUG NAAR MENU
EN
17