Introduction - Philips DSX6073/03A Manual

1
1

INTRODUCTION

Safety instructions
Beware of dangerous voltages in your receiver. Do not open the box. It may only be repaired by
specialist personnel.
Never place this Philips satellite-receiver outside in the rain or in a damp room to avoid short-
circuits and fire or electrical shocks.
Before connecting the receiver to the mains, check that mains voltage corresponds to the
voltage shown on the underside of the receiver.
If not, contact your dealer.
Make sure that no objects or fluids enter through the ventilation holes. Should liquid get into the
receiver, remove the receiver plug from the contact box and consult a TV-technician.
Make sure that the air can freely circulate through the ventilation holes. Leave a space of at least
3 cm all around the receiver.
Do not place the receiver near heat sources (radiator, etc...) or a device with a significant
magnetic field (such as an engine, transformer).
Do not use the receiver in a dusty environment or in a place where it may be subjected to
vibrations. Do not use the receiver immediately after having moved it from a cold to a hot place –
or vice-versa, or in a very damp room.
Avoid significant shocks if you have to transport the receiver.
Clean the receiver with a damp cloth. Never use abrasive products.
The receiver delivers a rated voltage of 14 or 18 V to the satellite dish. Make sure that your
satellite dish is only connected up via the inputs for the satellite dish and not with any other
input.
Never connect or replace a cable when the receiver is connected up to the mains network.
Please read the following instructions first before connecting up the receiver.
2