Before You Install Your Edelbrock Nitrous System - Edelbrock 70211 Installation Manual

Please read this Installation manual fully before installing this system.
You will need to have available the following tools:
Hand Tools:
Socket set including ratchets and extensions
Screwdrivers
Pliers
Bench vise
Wire crimping pliers, wire strippers
Floor jack
Razor blade or other sharp, flat edged cutting instrument
Vehicle jackstands
Safety glasses
Power Tools:
Power drill
Drill bits
You should understand the following skills:
Power tool safety procedures
Undercar safety procedures
Proper measuring techniques
Proper electrical assembly techniques
Basic engine operation and tuning techniques
℡
Anytime you have questions or concerns with your Edelbrock Nitrous System, please call our
©2003 Edelbrock Corporation
Brochure No. 63-0173
Caution!!

Before You Install Your Edelbrock Nitrous System...

Technical Support Hotline at 1-800-416-8628
before you start your engine.
Page 3 of 23
Rev. 02/03