Edelbrock 68272 Installation Instructions

Please study these instructions carefully before installing your new Tubular Exhaust System (TES). If you have any
questions, please contact our Technical Hotline at : 1-800-416-8628 from 7 am - 5pm, Monday-Friday, Pacific
Standard Time or e-mail us at Edelbrock@Edelbrock.com.
APPLICATIONS:
• For 1979-1980 Chev./GMC Pick-Up Trucks 1500 Series , 350 C.I.D. V8, 2 WD, Auto Transmission, with A.I.R.
• For 1981-1987 Chev./GMC Pick-Up Trucks & Suburban, 1500/2500 Series, 305 & 350 C.I.D. V8, 2 WD, Auto &
Standard Transmission with A.I.R.
TUBULAR EXHAUST SYSTEM: These components are designed as a system to improve the exhaust efficiency of the GM
305/350 c.i.d. V8 engines. A performance gain can be expected by the installation of the system. This system retains all
O.E.M. emissions equipment. This system requires welding an extension (supplied) to the heat riser valve actuating rod
(1979-80 only). If welding equipment is not available, use the services of a professional for installation of the extension.
Suggested Tools Needed for Installation: This vehicle has metric fasteners.
❑ 3/8" ratchet socket set with extensions and universal 13mm and 15mm swivel sockets
❑ Combination set of open-end wrenches
❑ Jackstands, screwdrivers, pliers, crescent wrench, etc.
❑ Liquid penetrant, (GM #1052627) anti-seize compound (GM #5613695)
❑ Gas welding equipment
SPECIAL NOTICE: This Edelbrock Tubular Exhaust System has received an Executive Order number (E.O.#) from the
California Air Resources Board (C.A.R.B.) making it legal for street use in all 50 states. To assist you with emission
equipment certification, we have included a silver fan shroud decal to help testing personnel verify the this part is a legal
replacement on the vehicle for which it is cataloged. The adhesive-backed decal should be affixed next to the existing
emission and engine specifications decal. Do not cover any part of your original emission decal.
WARNING: The use of "Thermal Wrap" or any aftermarket coating process will void the warranty on your Edelbrock
Tubular Exhaust Systems. Those products can cause excessive heat and moisture buildup resulting in corrosion and
failure of the system.
NOTE: High temperature spark plug wires and boots are recommended to withstand heat from T.E.S.
Proper installation is the responsibility of the installer. Improper installation will void warranty and may
Catalog #68272, #68273
©2006 Edelbrock Corporation
IMPORTANT NOTE:
result in poor performance and engine or vehicle damage.
Page 1 of 3
TUBULAR EXHAUST SYSTEM
Vehicle Applications: See Below
Catalog #68272, #68273

INSTALLATION INSTRUCTIONS

Brochure #63-68272
Rev. 8/06 - DA/mc