Setting The Rds Clock - Philips MCI200/21M Manual

Setting the RDS clock

Some RDS radio station may be transmitting a
real clock time at an interval of every minute.
It is possible to set the clock by using a time
signal which is broadcast together with the RDS
signal.
1
Press CLK/TIMER twice.
" 00:00 00:00" or current time starts flashing.
00:00 00:00 00:00
2
Press the soft key (!) on the system.
"SEARCHING FOR RDS TIME... SEARCHING FOR RDS TIME..." is
SEARCHING FOR RDS TIME... SEARCHING FOR RDS TIME...
SEARCHING FOR RDS TIME...
displayed.
When RDS time is read, " RDS TIME
FOUND" is displayed and the current time will be
FOUND FOUND
FOUND FOUND
stored.
If the RDS station does not transmit RDS
time within 90 seconds, " NO RDS TIME
displayed.
Note:
– Some RDS station may be transmitting a real
time clock at a minute interval. The accuracy of
the transmitted time depends on the transmitting
RDS station.
RDS TIME RDS TIME
RDS TIME RDS TIME
NO RDS TIME" is
NO RDS TIME NO RDS TIME NO RDS TIME
Radio Reception
27