Philips HDRW720/69 Operating Instructions Manual page 26

In some cases, not all of the available TV channels may have been found
and stored during initial installation. In this case, you will need to search
for and store the missing or coded TV channels manually.
•) Switch on the TV set, and if necessary, select the programme number for the
DVD recorder.
•) Switch on the DVD recorder.
1 Press the DISC MENU button and then the SYSTEM
MENU button on the remote control.
P
The 'SYSTEM MENU' appears.
2 Select '
' using B .
3 Press C to select '
4 Select the line '
P
A message appears on the screen that the change of this
setting will flush the 'Time Shift Buffer'.
If the 'Time Shift Buffer ' contains important recordings, save
them with the REC/OTR n button first. Read additional
information to the 'Time Shift Buffer' in the chapter 'The Time
Shift Buffer'.
5 Select '
' with D and confirm with OK .
If the message window was closed, confirm the line with
C again.
6 Select '
' using B or A and confirm with C .
7 In '
', select the desired display using C .
(Frequency), (Channel),
channel)
8 In '
', enter the frequency or channel of the TV
station using the number buttons 0..9 .
Press C in the line '
search.
P
A changing channel number/frequency number will appear on
the TV screen.
Continue the automatic search until you have found the TV
channel you are looking for.
9 Using D or C in '
number you want to use for the TV channel, e.g. '
'.
' using B and confirm with C .
(Special/hyperband
' to start the automatic
', select the programme
'.
0 Press OK to store the TV channel.
A To search for other TV channels, begin again at
- In '
- Select the desired character position using D or C .
- hange the character at the desired position with B or A .
- Select the next character position in the same way.
- Confirm with OK .
' '
No function. This setting should remain '
not possible to receive TV channels.
', use D or C to select the TV system that
- In '
produces the least distortion of picture and sound.
- If reception is poor and the sound distorted you can turn off
NICAM.
In ' ', select '
- You can try fine tune the TV channel manually with D ,
C in the line '
B To end, press SYSTEM MENU .
8
.
', press C .
'. Otherwise it is
' using C .
'.