Table of Contents
Advertisement
SECTION 3
3-12
5
The following Wireless Network Properties window is displayed. If
you are running with WPA support, refer to the WPA
Configuration for Existing Network section.
6
If the network you want to configure is open (no encryption, no
authentication), click OK and this network is added to the list of
preferred networks.
7
If the network is not open and requires WEP data encryption,
click Data encryption (WEP enabled).
8
If the network is not open and requires network authentication,
click Network Authentication (Shared mode).
9
Edit the fields that you want to change for the selected wireless
network. For additional information about the fields on this
window, refer to Configuring a New Wireless Network.
10 Click OK.
SECTION 3, CONFIGURATION
CONFIGURATION
Advertisement
Table of Contents
