Kenwood KR-V999D Instruction Manual page 19

4
Adjust the volume levels of each speaker.
Listen to the test tone and adjust the volume level of each speaker so that they all produce the test tone at the same volume level.
SET UP
SP.SLCT SP.LVL SP.DIST
SPEAKER
LEVEL
TEST TONE
AUTO
MANUAL
OFF
=
L 0
dB
5
Enter the speaker distance.
Enter the distance from your listening position to the front (left or right), center, and rear (left or right) speakers. If both front (or
rear) speakers are not the same distance from the listening position, enter the distance to the closest speaker.
SET UP
SP.SLCT SP.LVL SP.DIST
SPEAKER
DISTANCE
FRONT
CENTER
SURR.
10 3. 0
ft m
6
Adjust the audio input level of the connected components.
The LEVEL INDICATOR lights during playback if the signal being input from an analog source is too large. If this occurs, use this
screen to attenuate the input level for that source.
SET UP
SP.SLCT SP.LVL SP.DIST
INPUT LEVEL
SELECTOR: TUNER
0
LEVEL : dB
This completes the surround setup.
1 Select the test tone type.
AUTO
MANUAL : The test tone only comes from the selected speaker (displayed in blue).
MAIN
3
OFF
IN LVL
2 Adjust the Volume level of each speaker.
1 Listen to the test tone and select the speaker you want to adjust.
• The selected speaker icon turns blue and the speaker name and level appear (at the bottom of
the screen) to show that it can be adjusted.
1
2 Listen to the test tone and adjust the volume level of the speaker ( 10 dB) using the
TUNING/SKIP keys on the remote control.
2
TUNING/SKIP – : Lowers the volume TUNING/SKIP + : Raises the volume
• Adjust the subwoofer as you desire.
3 Continue to the SP.DIST (speaker distance) screen.
1 Select the speaker.
MAIN
The speaker name turns blue. An arrow icon appears to indicate the selected speaker.
3
IN LVL
2 Enter the speaker distance.
Use TUNING/SKIP on the remote control to select the appropriate distance.
The distance is adjustable from 0.0meters (0 feet) to 9.0meters (30 feet) in 0.3meter (1 foot)
steps.
1
3 Continue to the IN LVL (input level) screen.
1 Select the input.
MAIN
1 Use TUNING/SKIP on the remote control to select the desired input.
2 Move the pointer downward.
IN LVL
2 Select an input level.
The input level is adjustable in 3 levels. Use TUNING/SKIP on the remote control to select the
1
smallest level required to extinguish the LEVEL INDICATOR (normally, set to 0 dB).
0 dB Ô –3 dB Ô –6 dB
2
3 Press the SETUP key on the remote to turn off the on-screen display.
4 Press either VIDEO, AUDIO, or TV key on the remote to cancel the OSD
remote control mode.
: The test tone switches between each speaker in regular intervals.
: Stops the test tone.
Preparing for surround sound
KR-V999D (En/T)
1 9