Table of Contents
Advertisement
Using the CD/MP3
Programming files
WMA-CD only)
Programming files of a disc is possible when play-
back is stopped. Up to 60 files can be stored in
the memory in any order.
1 In stop mode, press program button on the
unit (PROGRAM button on the remote control)
to enter program setting.
The icon "PROGRAM" and "– – – P–01" will
appear on the display. "– – –" indicates file
number of the disc and "P–01" indicates pro-
gram number.
2 Press p.call/album up or down button to se-
lect the desired album and press 4 or ¢
button (4 or ¢ SEARCH/SKIP/TUNING
button on the remote control) to select the de-
sired file.
The digit buttons (0~9) on the remote control
can also be used to select files.
The icon "PROGRAM" and program number
will start flashing.
3 Press program button on the unit ( PROGRAM
button on the remote control) to store the se-
lected file.
The file number returns to "– – –" and the next
program number will appear on the display.
4 Repeat steps 2 to 3 to select and store other
desired files in this way.
The icon "PROGRAM" will appear on the dis-
play and "FULL " will start flashing if you attempt
to program more than 60 files.
Press program button on the unit ( PROGRAM
button on the remote control) in stop mode to
review the program sequence.
(For MP3-CD and
5 Press 6 button to play the programmed files.
If you press REPEAT button on the remote
control during programmed playback, the cur-
rent file or all programmed files will be played
repeatedly.
The icon "REPEAT" or "REPEAT ALL " and the
icon "PROGRAM" will appear on the display.
6 Press 7 stop button once to stop program play-
back or twice to clear the program.
The icon "PROGRAM" will disappear from the
display.
Notes:
•
"P" represents PROGRAM.
•
The program is automatically cleared as soon as the
CD tray is opened.
•
The function of program setting is disabling in PLAY/
PAUSE mode.
Random
You can play all the tracks in random order.
1 During playing, pause or stop mode, press
RANDOM button on the remote control to
enable random play mode.
The icon "RANDOM" will appear on the dis-
play.
2 To exit random mode, press RANDOM button
again. The icon "RANDOM" will disappear
from the display.
Note:
If the program function enabled or the repeat function
is set on, will disable the random play mode.
11
EN
Advertisement
Table of Contents
