Memory Card Operation; Playback Of Memory Card - Kenwood DVF-N7080 Instruction Manual

Playback of MEMORY CARD

÷ Please refer to page 46 for the memory cards and the PC card adapters which can be used with this unit.
÷ Only JPEG files can be played back.
1
Insert a Memory card
1 Turn off the POWER
OFF
2 Insert a Memory card
3 Turn on the POWER
2
When the Input selector is not set to MEMORY
CARD, press the DVD/MEMORY CARD key.
MAIN UNIT
3
Select the files type
Select PHOTO, then press ENTER key.
Selecting by pressing the PHOTO key of the re-
mote also is possible.
REMOTE
DVD/MEMORY CARD
ENTER
÷ Always set the power to OFF (STANDBY) before insert-
ing or ejecting a card.
÷ To eject a card, press the EJECT button and remove
the card.
PC card adapter
Memory card
Instead of pressing the DVD/MEMORY CARD key,
switching also can be done in the following way.
1 Press the RETURN key on the remote to display
the SELECT INPUT menu.
RETURN
2 Press the Cursor up/down (5/∞) keys on the re-
mote to select MEMORY CARD, then press the
ENTER key.
Home screen of MEMORY CARD.
MEMORY CARD display
When no memory card or PC card adapter is in-
serted, or when the insertion is not sufficient, the
Note Note
unit will not switch to the HOME screen. In such a
case, change to power off (STANDBY) state and
insert the memory card or the PC card adapter
again.
÷ The display changes to the SETUP screen when the
SETUP part on the screen is selected.
÷ Return to the preceding screen is made when the RE-
TURN key is pressed.
43
DVF-N7080 (EN/E,X)
Please choose selector.
DVD
NETWORK SERVER
MEMORY CARD