To Check The Edited Contents; Playing Or Recording The Edited Contents; To Clear The Edited Contents - Kenwood CD-403 Instruction Manual

To check the edited contents

20

Playing or recording the edited contents

To clear the edited contents

Press any one of these keys.
Do this operation in the stop mode.
1. While you can edit with a different time setting to that of the tape you are using, part of the tape may be left with nothing recorded on it, or the
last track on side A or side B may be cut short.
Notes Notes Notes
2. The EDIT function may not operate properly for discs having only one track or having tracks of long duration such as classical music.
CHECK
P.MODE
CLEAR
OPEN/CLOSE
CD-406/DPF-R6030
÷ When the CHECK key is pressed, track numbers and remaining time in
the file A are displayed first, then those in the file B.
CD-404/DPF-R4030
REPEAT
DISC
TRACK NO.
NO.
÷ When the CHECK key is pressed, the track Nos. of edited songs will
automatically be displayed in the order they are edited.
When recording the edited content onto a tape, it is recommended
to use the synchro recording or CCRS recording function of
KENWOOD cassette decks.
÷ Do not adjust the output level from this unit particularly during record-
ing.
÷ With the CCRS function, the recording starts after about 1 minute.
÷ If you have a cassette deck capable of Double-speed recording, use
Normal-speed recording.
÷ For details, see the instruction manual of the cassette deck.
Press the 6 key to start playback according to the edited
content. The playback pauses at the beginning of the track
Note Note Note
edited for tape side B. Press the 6 key again to continue
playback.
Editing
P.C. indicator light up.
P.C. P.C. 0 1 2 3 4 5
SINGLE
TOTAL ALL
6 7 8 9 10
11 12 13 14 15
16 17 18 19 20