Satellite Tuner - Kenwood KTC-SR901 Quick Start Manuals

KTC-SR902/KTC-SR901 SIRIUS
Quick-Start Guide for:
KDC-X769/KDC-MP922/KDC-MP822/KDC-V7022/KDC-722
Step 1: Get your unit's individual
Electronic Serial Number (ESN):
a) Press the SRC button (
"SIRIUS" appears on the display
b) Press the MENU button (
appears on the display
c) Press the AM/FM buttons (
the options until "ESN XXXXXXXX" appears on the
display
d) Write the number down
e) Press the SRC button (
Step 2: Subscribe to SIRIUS Satellite
a) Make sure your vehicle has the stereo on and
the SIRIUS antenna has a clear view of the sky
with no obstructions (buildings, garage, etc.)
b) Have your Vehicle Identification Number (VIN)
from the vehicle that the radio is installed in.
c) Have your unit's ESN and your credit card
number handy
d) Contact SIRIUS on the web at siriusradio.com or
call toll-free: 1-888-539-SIRIUS (7474)
e) The operator will instruct you further
• Your tuner should be able to receive SIRIUS
Satellite signals almost immediately after you
subscribe
Searching for SIRIUS categories:
1) Press the NEXT button (
"CS-", "CS+", "CH-", and "CH+" are displayed
above the [1 – 6] buttons (
2) Use the CS- and CS+ buttons (
through the available program categories
) repeatedly until
) until "MENU"
) to scroll through
) to exit
) repeatedly until
).
) to search
®

Satellite Tuner

KDC-X969/KDC-X869/
• You must wait until all category information is
acquired before operating this function again
Direct access tuning (using the remote):
1) Press the DIRECT/OK button on the remote control
2) Use the remote's number buttons to enter the
stream number
3) Press the >>I button (
Switching the Seek mode:
1) Use the I<< and >>I buttons (
streams
2) Press the AUTO button (
mode between:
• Preset Seek (Seek through your presets)
• Channel Seek (Seek the next stream)
Setting stream presets:
1) Use the FM button (
2) Use the I<< and >>I buttons (
the stream you want to memorize
3) Press the NEXT button (
"1" – "6" are displayed above the [1 – 6]
buttons ( ).
4) Hold the preset button (
memorize the stream for at least 2 seconds
• When the stream is stored the preset number
display will flash once
• Only the preset number, not the category
information is stored
• Each preset button can store a different preset
stream for each preset bank
) to go to that stream
) to seek
) to cycle the Seek
) to select the preset bank
) to select
) repeatedly until
) you want to