Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product. Model KTC-HR300 Serial number...
HD Radio™ and the HD Radio logo are proprietary trademarks of iBiquity Digital Corp. iTunes is a trademark of Apple Inc. KTC-HR300 What is HD Radio Technology? HD Radio technology enables broadcasters to transmit a digital signal with its analog signal using existing frequency allocations for FM and AM stations.
Notes • If you experience problems during installation, consult your Kenwood dealer. • The illustrations of the display and the panel appearing in this manual are examples used to explain more clearly how the controls are used.
• Some of the models have the following displays when the Main channel and Sub channel are switched. - "Main"/"Primary"/"PRI": When it is switched to the Main channel KTC-HR300 - "Sub"/"Secondary"/"SEC": When it is switched to Sub channel Tuning Mode Sets the tuning mode.
Preset Memory Putting the frequency and channel in the memory. Select the band Press the [FM] or [AM] button. Select the frequency and channel to put in the memory Press the [4] or [¢] button. Put the frequency and channel in the memory Press the desired [1] —...
ON or OFF as described below. - 1: M/S, P/S indicator is OFF. - 2: M/S, P/S indicator is ON. - 3: M/S, P/S indicator blinks. KTC-HR300 Text Scroll Scrolls the display title. For operations, see the CD features of <Text Scroll>...
Function of remote In HD Radio Source [FM] button Select the HD FM band. Each time the [FM] button is pressed, it switches between the HF1, HF2, and HF3 bands. [AM] button Select the HD AM band. [4]/ [¢] buttons Tune up or down program.
Operations –DVD monitor– Functions While Displaying the Control DDX812, DDX712, DNX8120, DNX7120 Screen Switches to the source control screen to use various functions. KVT-512, DDX512, DNX5120, DNX512EX [HD Radio] button on the "Source Select" screen KTC-HR300...
[HD FM] Switches to the HD FM1/2/3 band. [HD AM] Switches to the HD AM band. [4], [¢] Tunes in a station. Use the [SEEK] to change the frequency switching. [CH DOWN], [CH UP] Selects a channel (program). [AME] Selects the Auto Memory mode. See <Auto Memory>...
Select a station you wish to store in memory Touch the [HD FM] or [HD AM] button. Touch the [4] or [¢] button. Store in memory Touch the [P1] – [P6] button for at least 2 seconds. Continue to touch until the memory number appears. KTC-HR300...
Accessories/ Installation Procedure Accessories Installation Procedure 1. To prevent short circuits, remove the key from the ignition and disconnect the - terminal of the battery. 2. Install the FM/AM antenna and connect the ...1 antenna wire to the HD Radio tuner. 3.
When connecting to the control unit with 5L connector, set this switch down, and when KAB connector set the switch up (ON). Installation Carpet KTC-HR300 Control Unit (5L connector) ⁄ • The unit can only be connected to a control Antenna Cable (Accessory1) KTC-HR300 ⁄...
Troubleshooting Guide What might appear to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. The HD Radio mode cannot be selected. ✔...
6-1/2 × 1-3/8 × 4-5/16 inch Weight : 1.1 lbs (500 g) Specifications subject to change without notice. KTC-HR300 FCC WARNING This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual.