Kenwood KTC-9090DAB Instruction Manual page 28

Installation
■ Mounting the DAB Hideaway Unit
2CAUTION
• Install the DAB hideaway unit in a well-
ventilated location and do not place
objects on top of it.
• When installing to the car, the unit should
be securely fastened at a location that will
not interfere with driving.
• When making a hole in the chassis, check
that the gas tank, break pipe, wire
harness, or other part is not located on
the other side, and be careful not to cause
scratches.
• When attaching the mounting fittings
(Accessory2) to the DAB hideaway unit,
use only the supplied mounting screws
(Accessory3) (M4 x 8 mm). Use of
screws other than those supplied may
result in internal damage or insecure
mounting and is very dangerous.
• Installation using the self-tapping screws
DAB antenna cable
Accessory5
• Installation using the velcro tapes
28
Accessory4 (Ø5 × 20 mm)
Accessory2
Board etc.
thickness: 20 mm or more
Pile carpet
Accessory3
(M4 × 8 mm)
Carpet
Accessory6