Table of Contents
Advertisement
Basic Operations of remote
Loading and Replacing the battery
Use one lithium battery (CR2025).
Insert the batteries with the + and – poles aligned properly,
following the illustration inside the case.
2WARNING
Store unused batteries out of the reach of children. Contact a doctor
immediately if the battery is accidentally swallowed.
Do not set the remote on hot places such as above the dashboard.
Basic operations
[VOL.] buttons
Adjusting the volume.
[SRC] button
Each time the button is pressed the source switches.
For the source switching order refer to <Selecting the Source>
(page 5).
[ATT] button
Turning the volume down quickly.
When it is pressed again it returns to the previous level.
In Tuner source
[FM]/ [AM] buttons
Select the band.
Each time the [FM] button is pressed it switches between the
FM1, FM2, and FM3 bands.
[4]/ [¢] buttons
Tune up or down band.
[#0] — [#9] buttons
Press buttons [#1] — [#6] to recall preset stations.
[DIRECT] button
Enters and cancels the <Direct Access Tuning> (page 13) mode.
[38] button
Enters and cancels the <PTY (Program Type)> (page 16) mode.
[DNPP]/ [OK] button
Enters and cancels the <SNPP (Station Name Preset Play)> (page
14) mode.
— 32 —
Advertisement
Table of Contents
