Installation - Kenwood KRC-30 Instruction Manual

Connecting Wires to Terminals
Power Control Terminal Connections
The output of the Power Control terminal is switched along with
the power on/off switching of the unit.
This terminal can be connected to the P.CON (REMOTE) terminal
of the amplifier, or used as the power supply of the special
antenna adapter for Volkswagen cars. (MAX. 300 mA)
Power Control terminal
(Flat terminal)
Power control wire 5
Power Amplifier 6
Antenna Cord (ISO)
4
Antenna Conversion
Adaptor (ISO–JASO)
(Accessory3) 1
Special antenna adapter
(For Volkswagen car)
(Commercially available)
2

Installation

Installation
Firewall or metal support
Screw (M4X8)
(commercially
available)
Self-tapping
Metal mounting
screw
strap
(commercially
(commercially
available)
available)
Make sure that the unit is installed securely in place. If the unit is
unstable, it may malfunction (eg, the sound may skip).
3
— 26 — — 26 —
Bend the tabs of the
mounting sleeve
with a screwdriver or
similar utensil and
attach it in place.