Kenwood KDC-8020 Instruction Manual page 20

Hide thumbs Also See for KDC-8020:
Table of Contents

Advertisement

Menu system
System Q
Setting display/don't display for the System Q factors (Bass
center frequency, Bass Q factor, Bass extend, Middle center
frequency, Middle Q factor, and Treble center frequency) in
Audio control.
Display
Setting
"System Q ON"
The System Q factors are displayed.
"System Q OFF"
The System Q factors aren't displayed.
B.M.S. (Bass Management System)
Adjust the bass boost level of the external amplifier using the
main unit.
Display
Setting
"AMP Bass FLT"
Bass boost level is flat.
"AMP Bass +6"
Bass boost level is low (+6dB).
"AMP Bass +12"
Bass boost level is high (+12dB).
Refer to the catalog or instruction manual for power amplifiers that
can be controlled from this unit.
CRSC (Clean Reception System Circuit)
Temporarily have reception switched from stereo to mono to
reduce multi-path noise when listening to the FM station.
Display
"CRSC ON"
"CRSC OFF"
Strong electrical fields (such as from power lines) may cause
unstable sound quality when CRSC is turned ON. In such a situation,
turn it OFF.
Text Scroll <In External disc control mode>
Setting the displayed text scroll.
Display
"Scroll Auto"
"Scroll MANU"
The text scrolled is shown below.
• CD text
• MD title
— 20 —
<In FM reception>
Setting
The CRSC is ON.
The CRSC is OFF.
Setting
Repeats scroll.
Scrolls when the display changes.

Advertisement

Table of Contents
loading

Table of Contents