Tuning Mode; Tuning; Monaural Reception; Station Preset Memory - Kenwood KDC-2024S Instruction Manual

Tuner features

Tuning Mode

Choose the tuning mode.
Press the [AUTO] button.
Each time the button is pressed the Tuning mode switches as
shown below.
Tuning mode Display
Auto seek "AUTO 1"
indicator
Preset station "AUTO 2"
seek indicator
Manual —

Tuning

Selecting the station.
1
Select tuner source
Press the [SRC] button.
Select the "TUnE" display.
2
Select the band
Press the [FM] or [AM] button.
Each time the [FM] button is pressed it switches between the
FM1, FM2, and FM3 bands.
Frequency range (KDC-2094 only)
- FM1: 65.0 MHz — 74.0MHz
- FM2, 3: 87.5 MHz — 108.0MHz
3
Tune up or down band
Press the [4] or [¢] button.
• During reception of stereo stations the "ST" indicator is ON.
• Only monaural reception is available for the FM1. (KDC-2094 only)
Operation
Automatic search for a station.
Search in order of the stations
in the Preset memory.
Normal manual tuning control.
KDC-2094: Available in the FM2 and FM3 only

Monaural Reception

Noise can be reduced when stereo broadcasts are received as
monaural.
Press the [MONO] button for at least 1 second.
Each time the button is pressed for at least 1 second the
Monaural Reception turns ON or OFF.
When it's ON, the Monaural indicator is ON.

Station Preset Memory

Putting the station in the memory.
1
Select the band
Press the [FM] or [AM] button.
2
Select the frequency to put in the memory
Press the [4] or [¢] button.
3
Put the frequency in the memory
Press the [#1] — [#6] button for at least 2 seconds.
The preset number display blinks 1 time.
On each band, 1 station can be put in the memory on each [#1]
— [#6] button.

Auto Memory Entry

Putting stations with good reception in the memory
automatically.
1
Select the band for Auto Memory Entry
Press the [FM] or [AM] button.
2
Open Auto Memory Entry
Press the [AME] button for at least 2 seconds.
— 10 —