Surround Control Adjustment; Position - Kenwood DDX8032BT Instruction Manual

Audio Control

Surround Control Adjustment

You can adjust the sound field.
1 Display the Surround Control screen
2 Adjust the sound field
1
2
1 Sets the surround position by adjusting the
front and rear volume balance.
2 Sets the vocal image position by adjusting
the right and left vocal volume level.
3 Turns the Panorama mode On or Off.
4 Returns to Surround Control screen.
⁄
• You cannot use the <Surround Control Adjustment>
during playback of a Multi-channel source.
• You cannot use the <Surround Control Adjustment>
when the sound field of "Dolby PLII Movie", or "Dolby PLII
Matrix" has been set.
88 DDX8032BT/DDX8032BTM

Position

You can adjust the sound effects according to
your listening position.
1 Display the Position screen
Touch
Control Menu" screen (page 84).
1
1 Sets a listening position.
2
3
4
2 Displays the Position Fine Control screen.
3 Stores the present adjustment setup in
4 Returns to the "Audio Control Menu" screen.
⁄
• The final distance is adjusted to the total of Car Type Set
Up value (page 60) and Position Setup (both Position and
Position Fine Control) value.
• If you change the Car Type Set Up value (page 60), the
position is set to "All".
• Only the adjusted distance of position setup (Position
and Position Fine Control values) is stored in memory.
Therefore, the final adjustment distance changes if you
change the Car Type Set Up value (page 60).
1
You can select any of "Front R" (Right front),
"Front L" (Left front), "Front All" (All front),
and "All" (All) positions.
(page 89)
memory, or calls it from memory.
To store your adjustment in memory:
Continue to touch
than 2 seconds.
To call your adjustment from memory:
Touch to of your adjustment
you wish to call from memory.
in the "Audio
2
3
4
to more