Table of Contents
Advertisement
Playback Mode
Setting playback
modes
Voice Mode
Making a voice
recording
If the internal memory
reaches capacity, the blue
and orange LED indicators
blink rapidly, and
recording stops
automatically.
You can use the three playback modes to change how your player plays back tracks.
Normal
Slide the switch to the desired position to select a playback mode.
•
In Normal mode, playback ends at the last track.
•
In Repeat All mode, your player plays all the tracks before repeating them. Playback continues
until you press the Stop button.
•
In Random mode, your player plays back tracks at random.
Playback continues until you press the Stop button, until all the tracks have been played.
In Voice mode, you can create and play back voice or audio recordings.
Press the Forward and Reverse buttons simultaneously to switch between Player and Voice modes. For
more information on switching between modes, refer to "Player LED Indicators" on page 1-7.
The blue and orange LED indicators light up to show that your player is in Voice mode.
Make sure that your player is placed as close as possible to the recording source.
1.
Press and hold the Stop button to start recording.
The blue and orange LED indicators blink while you record.
2.
Press the Stop button to stop recording.
The blue and orange LED indicators stop blinking when you stop recording.
The recorded audio is stored in your player's internal memory as a .WAV file, in the directory E:\VOICE
(where E:\ is the drive letter of your internal memory). Recorded audio cannot be stored in the
removable memory (SmartMedia Memory card).
Repeat All
Random
Using Creative TravelSound MP3 5-2
Hide quick links:
Advertisement
Table of Contents
