Using The Remote Control; Installing Remote Control Batteries; Aiming The Remote Control; Turning On Your Tv For The First Time - Insignia NS-32E320A13 User Manual

Insignia 32" 720p LED TV

Using the remote control

Installing remote control batteries

To install remote control batteries:
1 While pressing the release latch on the back of
the remote control, lift the battery
compartment cover off the remote control.
2 Insert two AAA batteries into the battery
compartment. Make sure that you match the +
and – symbols on the batteries with the + and –
symbols in the battery compartment.
3 Replace the battery compartment cover.
Cautions
• Batteries should not be exposed to excessive
heat, such as sunshine, heat registers, or fire.
• Battery chemicals can cause a rash. If the
batteries leak, clean the battery compartment
with a cloth. If chemicals touch your skin, wash
immediately.
• Make sure that batteries are disposed of
correctly. Do not burn or incinerate.
Notes
• Do not mix batteries of different types.
• Do not mix old and new batteries.
• Remove batteries when the charge is depleted.
• If the remote control is not going to be used for
an extended period of time, remove the
batteries.

Aiming the remote control

To aim the remote control:
• Point the remote control towards the remote
sensor on the front of your TV.
Turning on your TV for the
first time
The first time you turn on your TV, the Setup Wizard
opens. The Setup Wizard guides you through
setting up basic settings including the menu
language, time setting, picture mode, TV signal
source, and the channel list.
To set up your TV:
1 Make sure that you have:
2 Press
3 Press
4 Press
www.insigniaproducts.com
• Installed the remote control batteries. (See
page 19 for details).
• Connected an antenna, cable TV, or satellite
TV. (See page 9 through
• Connected the power cord. (See page
details.)
(power) to turn on your TV. The Choose
Your Menu Language screen opens.
Choose Your Menu Language
English
Français
Español
MOVE OK SELECT
MENU
ENTER
Set menu language to English, Français, or Español
or to highlight the language you
want, then press ENTER. The Choose Your Time
Setting screen opens.
Choose Your Time Setting
Mode
Time Zone
Daylight Savings
Year
Month
Day
Time
MOVE
OK SELECT
MENU
ENTER
If Automatic, options are automatically set by TV source
or to highlight Mode, then press
or to select Custom (to set the date and
time manually) or Auto (to set the date and time
automatically from a TV signal source based on
the time zone you select).
Note
If you select Auto, the displayed time will be
incorrect until your TV gets the correct time from a
TV signal source.
12 for details.)
9 for
PREVIOUS EXIT
EXIT
Custom
Pacific
On
2011
Jan
1
12:25 AM
PREVIOUS EXIT
EXIT
19