Set Heating Cycle Rate - Honeywell RTH6300B Installation Manual

Installation Guide
Function 5: Heating cycle rate
5
Done
Press to change setting.
When correct setting is
selected, press
display next function.
Press the
ing system and optimize its operation:
5
5
9
Next
3
1
to
N N E E X X T T
or button to select your heat-
Gas or oil furnace: Use this setting if you have
a standard gas or oil furnace that is less than
90% efficient.
Electric furnace: Use this setting if you have
any type of electric heating system.
Hot water or high-efficiency furnace: Use
this setting if you have a hot water system or a
gas furnace of greater than 90% efficiency.
Gas/oil steam or gravity system: Use this set-
ting if you have a steam or gravity heat system.
Note: If Function 5 does not appear, please
turn to the next page to continue.
20