Connect Wires To New Wallplate - Honeywell RTH5100B Installation Instructions Manual

Step 7. Connect Wires to New Wallplate
1. Match the labeled wires to the letter designations
on the wallplate.
2. If wires are to be connected to both Rc and R,
loosen the Rc and R screw terminals and remove
the metal jumper.
3. If only one of the terminals, Rc or R, is to be
connected, leave metal jumper in place.
METAL JUMPER
TERMINAL BLOCK
SCREW TERMINALS
LETTER
DESIGNATIONS
O/B W
R
C
R
Y
NOT
USED
G
WALLPLATE
15
RC
R
Y
W/O/B
G
M22180
69-1716