Advertisement
Quick Links
Please study these instructions carefully before installing your new Axle-Back Exhaust System. If you have any questions,
please contact our Technical Hotline at: 1-800-416-8628, 7:00 am to 5:00 pm, Monday through Friday, Pacific
Standard Time or e-mail us at Edelbrock@Edelbrock.com.
Proper installation is the responsibility of the installer. Improper installation will void warranty and may
Suggested tools needed for installation:
❑ 13mm & 15mm deep sockets and ratchet
❑ Floor jack & jackstands
❑ Penetrating oil
DISASSEMBLY
1. Raise rear of vehicle on flat stable surface and
support using jackstands.
2. Use penetrating oil on OE clamps that hold
mufflers to overaxle pipe.
remove the stock muffler isolator brackets from
frame and remove the stock muffler from
vehicle.
Exhaust gas contains carbon monoxide, a deadly invisible gas. Correct any leaks before driving.
#5644 Parts List
Qty.
Part #
❑ 1
25-3233
❑ 1
25-3234
Edelbrock Corporation , 2700 California Street, Torrance, CA 90503
©2007 Edelbrock Corporation
Catalog #5644, #5654
®
Catalog #5644 (Aluminized), #5654 (Stainless Steel)
result in poor performance and engine or vehicle damage.
Loosen clamps,
Description
Muffler Assembly (Left Side)
Muffler Assembly (Right Side)
Toll-Free Tech Line: 1-800-416-8628
Office: 310-781-2222
Tech E-Mail: Edelbrock@Edelbrock.com
EDELBROCK AXLE-BACK EXHAUST SYSTEMS
For 2005-2008 Ford Mustang GT with 4.6L V8
IMPORTANT NOTE:
ASSEMBLY
1. Install muffler assembly number #25-3233 on
driver's side of vehicle using supplied band
clamps and the stock muffler isolators and
brackets removed in step 2 of disassembly.
2. Install
passenger's side of vehicle in the same manner
as left muffler.
NOTE:
adjusted to obtain better clearance, if needed.
WARNING!!!
Qty.
❑ 1
❑ 1
INSTALLATION INSTRUCTIONS
muffler
assembly
The I-pipe /overaxle pipes can be
#5654 Parts List
Part #
Description
25-3243
Muffler Assembly (Left Side)
25-3244
Muffler Assembly (Right Side)
#25-3234
on
Brochure #63-0494
Rev. 9/07- DA/mc
Advertisement
