Playing Tv Audio Only; Changing Channel Settings; Automatically Scanning For Channels - Dynex DX-26L150A11 User Manual

Changing channel settings

Playing TV audio only

You can turn off the picture on your TV and listen to only the program
audio.
To play only the TV audio:
1 Press MENU. The on-screen menu opens.
Picture Mode
Contrast
Brightness
Color
Tint
Sharpness
Backlight
Advanced Video
Move
2 Press or to highlight Setup, then press . The Setup menu
opens.
Parental Controls
Time
Closed Caption
Menu Settings
VGA Settings
Input Label
Restore Default
Audio Only
Move
3 Press or to highlight Audio Only, then press or to
select On.
4 Press EXIT to close the menu. After pressing EXIT, the picture will
turn off in approximately 5 to 10 seconds.
Notes:
Audio Only works only when the input source is TV and your TV is receiving
a broadcast signal.
To exit Audio Only mode, press any button. When you exit Audio Only
mode, the Audio Only option is automatically reset to Off.
Picture Audio Setup Channel
Custom
70
40
60
0
50
30
Select
Exit
MENU
Picture Audio Setup Channel
On
Select Exit
MENU
Changing channel settings

Automatically scanning for channels

To auto scan for channels:
1 Press MENU. The on-screen menu opens.
Picture Mode
Contrast
Brightness
Color
Tint
Sharpness
Backlight
Advanced Video
Move
2 Press or to highlight Channel, then press . The Channel
menu opens.
TV Source
Auto Scan
F avorite
Show/Hide
Channel No.
Channel Label
DTV Signal:
Move
3 Press or to select Antenna or Cable, depending on your
setup.
4 Press or to highlight Auto Scan, then press ENTER. A
confirmation box opens.
Press "ENTER" Key to Select
5 Press or to select Yes, then press ENTER to start the scan. A
progress box shows the progress of the scan.
17
DX-26L150A11
Picture Audio Setup Channel
Custom
70
40
60
0
50
30
Select Exit
MENU
Picture Audio Setup Channel
Antenna
2.1
WGBH-SD
Normal
Select Exit
MENU