Edelbrock 5292 Installation Instructions

Please study these instructions carefully before installing your new sub-frame connectors. If you have any questions,
contact our Technical Hotline at: 1-800-416-8628 from 7 am - 5 pm, Monday through Friday, Pacific Standard Time
or e-mail us at: Edelbrock@Edelbrock.com.
Application: Designed to fit 2005-2008 Ford Mustang Coupe, Edelbrock sub-frame connectors are stronger and more
effective due to (1) Large welded surface area, (2) connects rear suspension connection point to engine cradle and front
K-member, (3) ground clearance is minimally affected.
Tools Required:
❑ 1/2" and 3/8" rachet and metric sockets
❑ Jack and jackstands or drive-on lift (preferred)
❑ Putty knife or scraper
❑ MIG welder
❑ C-clamps, welding clamps, or locking pliers
Proper installation is the responsibility of the installer. Improper installation will void warranty and may
Notes:
1. Weld-on sub-frame connectors should be installed by a professional welder with proper equipment and a good
understanding of welding dissimilar metals. The sheet metal used to form the sub-frame of the vehicle is
relatively thin. The end brackets of the Edelbrock sub-frame connectors are made from 1/8 thick hot-rolled,
laser-cut and formed to fit the vehicle's sub-frame.
2. Sub-frame connectors should not be installed on vehicles that have sub-frame damage due to accident or
vehicles with weak or unequal rate springs.
©2007 Edelbrock Corporation
Catalog #5292
IMPORTANT NOTE:
result in poor performance or vehicle damage.
Parts List
Qty. Part #
❑ 1
25-4085 Left Sub-frame Connector
❑ 1
25-4086 Right Sub-frame Connector
❑ 1
23-2156 Left Mid-frame Bracket
❑ 1
23-2157 Right Mid-frame Bracket
❑ 6
- 10mm - 1.5 x 20mm Hex Bolts
❑ 6
- 10mm Lock Washers
❑ 2
- 5/16 - 18 Hex Nut (Nyloc)
❑ 2
- 5/16 Flat Washers
Page 1 of 2
EDELBROCK SUB-FRAME CONNECTOR
For 2005-2008 Ford Mustang Coupe
INSTALLATION INSTRUCTION
❑ 1/2" Drive torque wrench rated to over 80 ft./lbs.
❑ Soft-backed grinder for paint removal
❑ Pry bar
❑ Thread lock compound
Description
Catalog #5292
Brochure #63-5292
Rev. 9/07 - KS/mc