Installing A Hard-Drive Backplane Into An Expansion Hard-Drive Carrier - Dell PowerEdge C8000 Hardware Owner's Manual

Figure 2-13. Removing and Installing a Hard-Drive Backplane from an Expansion
Hard-Drive Carrier
6
5
1 expansion hard-drive carrier
3 hard-drive backplane
5 strap handle

Installing a Hard-Drive Backplane Into an Expansion Hard-Drive Carrier

CAUTION:
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized is not covered by
warranty. Read and follow the safety instructions that came with the product.
1 Align the hard-drive backplane with the screw holes on the hard-drive tray.
See Figure 2-13.
2 Replace the three screws securing the hard-drive backplane to the hard-
drive tray. See Figure 2-13.
48
Installing System Components
1
4
Many repairs may only be done by a certified service technician. You
2 hard-drive tray
4 screws (3)
6 expansion hard-drive carrier notch
2
3