Mouse Mode - Dell PowerEdge C5125 Using Instructions

Mouse Mode

On the Mouse Mode page, you can configure the mouse mode options.
Table 1-16. Mouse Mode
Item
Current Mouse Mode
Set Mode to Absolute
Option
Set Mode to Relative
Option
Save Button
IPMI is an OS-independent platform, and KVM support is an added feature
for IPMI. For your mouse to function properly, please configure the mouse
mode settings according to the mouse is absolute coordinates or relative
28
Description
Absolute or relative
NOTE:
Whether you chose which of these two modes, it
enables you to see two mouse cursors where, one is the
redirected host mouse cursor and the other is the actual
local mouse cursor. When the single cursor checkbox is
selected, the user only see the redirect mouse cursor.
Select this option to select mouse mode to Absolute,
depending upon your system.
Select this option to select mouse mode to Relative,
depending upon your system. If you select the single
mouse checkbox, it locks the local mouse cursor inside the
redirected window and the user has to press <Alt+M> to
unlock and stop mouse redirection. Here <Alt+M> is
basically used to start or stop mouse redirection.
Use this button to make the settings active.