Alerts - Dell PowerEdge C5125 Using Instructions

Alerts

When BMC sends a platform event, such as an environment warning or a
component failure, an alert message may be sent to one or more email
addresses / IP addresses. On the Alerts page, you can configure alert
destinations. To delete an alert, select it and press Delete. To create a new
alert, select a destination address that has not been configured, yet, from the
alert table entry and click Modify. To send a test alert, select the alert from
the list and click the Send Test Alert button.
Table 1-14. Alerts
Item
Alert Policy #
Destination Address
Modify Button
Send Test Alert Button
Delete Button
26
Description
Lists all alert entries.
Lists the SNMP trap destination IP address or email
address for the listed entries.
This button takes you to the Modify Alerts page. You can
add a new alert configuration entry or modify an existing
entry.
Select an alert entry and press Send Test Alert to send a
test alert.
Select an alert configuration entry and press Delete to
delete the entry.