Rear Panel View; Rear Panel Description; Power Switch - B&K AVP3090 Owner's Manual

The AVP back panel is organized into groups of inputs and outputs for audio and video
as shown below.
1.

Power switch

2. AC fuse holder
3. AC input receptacle
4. S-video inputs/outputs
5. Digital inputs
6. Zone 1 preouts
7. Zone 2 preouts
8. Analog audio inputs
1. Power switch -
For switching AC power to the AVP preamplifier.
rocker must be in the on (I) position for the preamplifier to operate.
2. AC fuse holder -
Holds the AC Line fuse. Replace only with 0.5 A (½ A) 250 V fast blow
fuse.
3. AC input receptacle -
For attaching the supplied AC power cord to the preamplifier.

Rear panel view

9. Tape loop
10. V1 loop
11. V2 loop
12. CTRL OUT / IR IN jacks
13. Surround outputs
14. Send/RCV jacks
15. Composite video inputs
16. Composite video outputs

Rear panel description

Page 8
Off = O, On = I. The