Nikon CoolPix S9300 Reference Manual page 55

Option
Image mode
White balance
Metering
ISO sensitivity
AF area mode
Autofocus mode
C
Features That Cannot Be Used Simultaneously
This feature may not be used in combination with certain features (A73).
Set the combination of image size and image quality to be
A
71). The default setting is P 4608×3456.
recorded (
This setting is also applied to other shooting modes.
Adjust colors in the image closer to the colors as they
appear to the eye. Although Auto (default setting) can be
used under most types of lighting, you can apply the white
balance setting suited to the sky conditions or light source
to achieve better results if the default setting results are
unsatisfactory.
• When the white balance setting is other than Auto or
Flash, set the flash mode (A60) to W (off ).
Select the method that the camera uses to measure the
brightness of the subject. The camera adjusts the
exposure, which is a combination of shutter speed and
aperture value, based on the brightness measurement. The
default setting is
Higher ISO sensitivity allows you to take pictures of darker
subjects. Additionally, even with subjects of similar
brightness, pictures can be taken at faster shutter speeds,
and blurring caused by camera shake and subject
movement can be reduced. When ISO sensitivity is set to
Auto (default setting), the camera sets the ISO sensitivity
automatically.
• With the Auto setting, E (A26) is displayed on the
shooting screen when the ISO sensitivity is automatically
increased.
Choose how the focus area is determined from Face
priority (default setting), Auto, Manual, Center, or
Subject tracking.
When Single AF (default setting) is selected, the camera
focuses only while the shutter-release button is pressed
halfway. When Full-time AF is selected, the camera
focuses even when the shutter-release button is not
pressed halfway. You may hear the sound of the camera
focusing.
Description
.
A (Auto) Mode
A
71
E33
E35
E36
E37
E40
37