Connecting The Camera To A Printer - Nikon CoolPix S9300 Reference Manual

Connecting the Camera to a Printer (Direct Print)

Connecting the Camera to a Printer

1
Turn off the camera.
2
Turn on the printer.
• Check the printer settings.
3
Connect the camera to the printer using the included USB cable.
• Be sure that the plug is oriented correctly. When disconnecting the cable, do not pull
the plug at an angle.
4
The camera is automatically turned on.
• When connected correctly, the PictBridge startup screen (1) is displayed on the
camera monitor. Then the Print selection screen (2) is displayed.
1
B
If the PictBridge Startup Screen Is Not Displayed
Turn the camera off and disconnect the USB cable. Set the Charge by computer option (E80) in
the camera's setup menu to Off and reconnect the cable.
E26
2
Print selection
15/05
2012
NO. 32
32