Movie Edit - FujiFilm Finepix JX500 Series Owner's Manual

Using the Menus: Playback Mode
i MOVIE EDIT i
MOVIE EDIT
Edit movies.
■ MOVIE TRIMMING
Remove opening or ending footage to create an edited copy of the current movie.
1 Display the desired movie.
Select i MOVIE EDIT in the playback menu, then select MOVIE TRIMMING. To remove
2
footage from the start of the copy, proceed to Step 3; otherwise, proceed to Step 4.
3
Press the selector down to begin playback and press it down again when the new opening
frame is reached.
4 Press MENU/OK. To remove footage from the end of the copy, proceed to Step 5; otherwise,
proceed to Step 6 (to exit without creating an edited copy, press DISP/BACK).
5 Press the selector down to begin playback and press it down again when the new closing
frame is reached.
6
Press MENU/OK to save the copy.
■ MOVIE JOIN
Add existing footage to the end of the current movie to create an edited copy.
1 Display the desired movie.
Select i MOVIE EDIT in the playback menu, then select MOVIE JOIN.
2
3 Press the selector left or right to highlight a movie.
4
Press MENU/OK to add the highlighted footage to the end of the current movie and save the
resulting copy, or press DISP/BACK to exit without creating a copy.
R R Both movies must have been recorded at the same frame size and frame rate and have a
Both movies must have been recorded at the same frame size and frame rate and have a
combined fi le size of no more than 2 GB. combined fi le size of no more than 2 GB.
68 Menus